#Mohawk stringed instrument lacquer full#
#Mohawk stringed instrument lacquer plus#
#Mohawk stringed instrument lacquer professional#

on a rack and played normally.īut if you use a lacquer/enamel blend carefully read and follow the manufacturer's recommendations - and be extra careful to apply VERY thin coats. If you use conventional lacquer, apply thin coats (and have practiced the whole system on scrap until the final result is even and able to go straight to the buffer) you can complete a finish job in 2-3 days, with the product buffed and able to be put in a case. UPS Only 74.00 Quantity Wood Finish Supply / Authorized Mohawk Distributor Our New Location: 2465 Second Street (One block west of California St. Just because you see 'cellulose nitrate' does NOT mean it's a conventional lacquer, or a 'pure nitro' lacquer - you have to be able to read an MSDS and understand the noted components to know what you really have! Classic Stringed Instrument Lacquer, Gal. Note: Acrylic resin is not hazardous and does not need to be listed on the MSDS - so it may be a component alone or in a nitro/acrylic blend (very common for impact and cracking resistance) both nitrocellulose (cellulose nitrate) and MOST alkyd resins ARE hazardous - but all alkyd resins require naphtha or mineral spirits as a solvent, which are NOT used in conventional lacquers! If the Product Data Sheet recommends that each coat dry longer than an hour and the MSDS lists naphtha, alkyd enamel and/or mineral spirits it's a lacquer enamel blend and extended dry time is required (the dry film will also be softer than conventional lacquer).

#Mohawk stringed instrument lacquer full#

Lacquers are not applied like paint products! That's the most common error when using lacquers for the first time - applying full coverage coats. If ANY 'lacquer' is applied to full coverage or flow they are being applied FAR too thick! That's why, in the Stewmac finishing guide, they recommend such a long dry time - using the incorrect word 'cure' - as conventional nitro, acrylic, and even lacquer/enamel blends all dry ONLY by evaporation.Ī single, properly applied coat of acrylic, nitrocellulose or acrylic/nitro blend conventional lacquer dries in 30-60 minutes, and lacquers do not cover or flow together into a cohesive film until the third or fourth coat.

#Mohawk stringed instrument lacquer plus#

Doesn't seem to yellow with UV exposure, so that could be a plus if you don't want the guitar to age.Īnybody agree or disagree with me on any of these?Īnybody tried Gracey's or any other brands?įWIW most Colortone (Stewmac) and Deft 'lacquer' products are blends of lacquer and oil-based enamel. Behlen Classic Instrument Lacquer remains a high-quality nitrocellulose lacquer specifically designed for wooden string instruments. Can't tell if it yellows much or not.ĭeft never seems to dry, and in my opinion, is kinda garbage. The Mohawk Classic Instrument Lacquer which replaces the H. Mohawk has a similar smell and hardness to Reranch, but it seems to spray on thinner and somehow runs more easily. Haven't used it long enough to know whether it yellows over time. Feels a little easier to burn through when sanding. Stewmac nitro feels a little softer/tackier and seems to retain a funky smell for longer than Reranch.

Made to withstand the expansion and contraction that is characteristic of the unique construction of stringed instruments. Reranch seems to spray on buttery thick, and it seems to dry harder than others I've tried. Mohawk Stringed Instrument Lacquer 13 oz Brand: M MOHAWK 79 ratings 2400 Specifically as a high quality finish for thin, flexible tone-woods such as those used on stringed instruments.

The use of appropriate respirators, face-masks, eye protection, and full-body clothing is recommended, and always work in a well ventilated area.Wanted to open up a thread to get all your opinions on various brands of Nitrocellulose rattle can clear coats you have used.įor example, my experience brands I've tried: Protective clothing and equipment should always be used when working with any finishing products.

This product is delivered by road transport only, but can be delivered to PO Boxes. This product cannot be shipped outside of Australia. Typically 1-2 aerosol cans needed to finish a guitar body (One can if experienced/careful, else two).

#Mohawk stringed instrument lacquer professional#

Use with Sanding Sealer or Vinyl Sealer for a professional finish. Pack size: 3. Excellent flow, flexibility and durability, with superior rubbing qualities that yield a mirror-like reflection. To touch: 7 minutes To handle: 15 minutes Mohawk® Coatings Classic Instrument Lacquer Formulated to produce a superior finish on thin, flexible veneers such as those used on stringed musical instruments. Easy to apply and dries quickly.ĭry time: Air dry 22 deg C, 35% relative humidity : Specially formulated to enable the experienced as well as novice to do a professional finish and touch-up. Equivalent product to Behlen Clear Lacquer Gloss (The Behlen Brand has been discontinued by the parent RPM/Mohawk group).ģ. Nitrocellulose Lacquer - Clear Gloss finish.